December 2022 - SRT Syndicate

How to Lubricate Dexter EZ Lube Axles

Posted on December 24, 2022May 24, 2024 by Godfrey Dach

When you have Dexter axles and a Dexter axle hub cap, proper maintenance is required. Lubrication is one of the more difficult aspects of any motorhome or trailer. Fortunately, if you have a fifth-wheel trailer with Dexter axles, it should come with the Dexter EZ Lube system. Lubricating the bearings will be far easier with this system and doesn’t need to be as frequent either. For instance, Dexter recommends axles are lubricated even twelve thousand miles or once a year. So, how to lubricate Dexter EX Lube axles?

Secure the Trailer

First, you need to find a spot you won’t be disturbed and that is safe to work on the trailer. You want somewhere that offers enough space and for you not to be disturbed every few minutes. This has to be done properly, so you want a quiet place to work in. Next, you should jack up the trailer’s wheels with the appropriate equipment; they should also spin freely off the ground. Everyone has an opinion over what works best for jacking up a trailer, so find what works best for yours and be careful not to damage anything.

Start Greasing

You need to remove the cap that covers the axle fitting and attach the grease gun to the zerk feature. Rotate the wheel and pump the grease until it spills out from the front of the axle.

You should then remove the gun and clean away any excess grease before replacing the cap. This should be repeated on all of the trailer’s wheels. You shouldn’t rush this part or be over-zealous either; take it slow and easy. Remember, you don’t want to damage the Dexter axle hub cap, bearings, or any other component during lubrication.

Lower the Wheels

Once an axle has been greased, you should gently lower it to the ground and do the same for the others. This again, shouldn’t be rushed, otherwise, you could damage the bearings and hub caps unnecessarily. It is important to be careful when you’re working with jacks and stands; you don’t want to use the wrong ones and cause damage to the trailer. You can read more about A How-To Guide to Lubricate a Mounted Bearing by visiting https://www.srtsyndicate.com/a-how-to-guide-to-lubricate-a-mounted-bearing/

The Simple Way to Grease the Axles

The Dexter EZ Lube axles are ideal for those who don’t want to get their hands dirty. You don’t have to do a lot of work and it’s incredibly easy to complete. Of course, this is a task that must be done properly and with due care and attention. If you don’t lubricate the axles sufficiently, it could result in a major problem somewhere down the line. It’s the same if you rush the job and use the wrong tools; problems will occur.

Making Life Simpler for You

Maintaining enclosed trailer accessories like Dexter axles and Dexter axle hub caps is essential for optimal performance and longevity. With the Dexter EZ Lube system, lubricating the axles becomes a simpler task, requiring less frequent maintenance. When greasing the axles, it’s crucial to secure the trailer properly and use the right tools with care to avoid damage to components like the bearings and hub caps. The Dexter EZ Lube axles streamline the greasing process, making it more efficient and convenient for trailer owners. By ensuring proper maintenance, including lubricating the axles, you can extend the lifespan of your trailer and avoid potential issues in the future. Whether you’re a seasoned trailer owner or new to maintenance tasks, the Dexter EZ Lube system offers a straightforward solution to keep your trailer running smoothly.…

A How-To Guide to Lubricate a Mounted Bearing

Posted on December 24, 2022May 24, 2024 by Godfrey Dach

From a Dexter axle hub cap to wheel bearings, every inch of a vehicle must be properly cared for. Good maintenance makes a huge difference, and you can’t be slack about it either. Mounted bearings must be lubricated to avoid friction when the engine is running. When you lubricate a mounted bearing, you have a layer of oil between the bearing rings and rolling elements which ensures things operate as they should. So, how to lubricate a mounted bearing?

Consult the Manufacturers Guide

Any vehicle purchased should have a manufacturer’s manual. This is an important guide that gives you recommendations and details on maintenance schedules; you should consult the manual. You need to find out which lubricant the manufacturer recommends. Compatibility ensures fewer problems and while most mounted bearings are lubricated upon purchase, there will come a time you have to grease it.

It’s important to remember that there are many types of mounted bearings, and each is different from the next. It means one lubricant might be more effective with one type of bearing than with another. When the wrong type of grease is used or over-lubricated, it’s likely to cause issues. That is why checking the manufacturer’s recommendations is crucial.

Prep the Bearing

When you know the type of lubricant recommended by the manufacturer and how much to use, it’s time to prep and start the lubrication. Firstly, everything that surrounds the bearings should be cleaned, including the actual bearing. Once this is done, you will need to manually insert the grease and rotate it around to ensure the bearing is sufficiently lubricated.

Remember, an even distribution of the grease is necessary. It’s like when you change a

Dexter axle hub cap, a suitable replacement is required.

Tackling Problems During Lubrication

While there shouldn’t be too much trouble, some mounted bearings can present a challenge or two. Typically, this is down to the position of the bearing, and manual lubrication mightn’t be possible. When that happens, an alternative is needed to ensure the mounted bearing is properly lubricated. For instance, solid lubrication could be used instead of manual lubrication. Or a single-point lubricant system could be more suited to the task. you can read more about Guide to Know How Often to Grease Trailer Bearings by clicking here.

Always Have a Schedule in Place for Routine Maintenance

Mounted bearings must be properly lubricated to avoid wear and tear; however, anything can go wrong with them. Lubrication isn’t always easy either, especially if you don’t do it correctly. That’s why a proper maintenance schedule is needed. Fortunately, when you buy mounted bearings, they usually come with a manual or instruction guide that says how often they should be lubricated. This is a schedule you should stick with because it’s more likely to avoid a breakdown in the system.

Always Care for your Bearings

In summary, maintaining enclosed trailer accessories like Dexter axle hub caps and wheel bearings is crucial for ensuring the longevity and efficiency of your vehicle. When it comes to lubricating mounted bearings, consulting the manufacturer’s guide is essential to determine the appropriate lubricant and lubrication procedures. Proper preparation of the bearing and even distribution of grease are key steps for effective lubrication.

Though lubricating mounted bearings may pose challenges, adhering to a routine maintenance schedule can help prevent breakdowns and costly repairs. Similar to replacing a Dexter axle hub cap, caring for mounted bearings requires attention to detail and adherence to recommended maintenance intervals.

Ultimately, adequate lubrication is vital for the smooth operation of mounted bearings, and neglecting this maintenance aspect can lead to premature wear and failure. By following manufacturer recommendations and maintaining a regular maintenance schedule, you can ensure optimal performance and longevity of your enclosed trailer accessories, including mounted bearings, for years to come.

…

Guide to Know How Often to Grease Trailer Bearings

Posted on December 23, 2022May 24, 2024 by Godfrey Dach

It’s necessary to ensure the proper maintenance is given to a Dexter axle hub cap and it’s the same with trailer bearings. Unfortunately, bearings are continuously forgotten about. Your forgetfulness can cause a lot of problems, including costing a fortune to fix. Being stranded at the side of a road for hours isn’t ideal for anyone and it’s more likely to happen if you don’t properly grease your trailer’s bearings. So, how will you know how often to grease a trailer’s bearings?

A Rule of Thumb

Typically, it’s thought trailer bearings should be greased once every ten thousand miles. This is a general rule that most people adhere to. It is, however, important to understand that this might not be necessary in every case. For example, you have a trailer that’s used once every few months. You shouldn’t need to grease the bearings often; in fact, once a year might be sufficient. This, of course, depends on how often the trailer is used and its duration on the road. Many factors determine how often you should grease a trailer’s bearings.

Consider your Speed

Despite what you might think, speed determines how often the bearings must be greased. Running at a higher speed on the open road adds pressure to the wheels. It will then target the bearings and their protection. You’ll have to grease them more frequently by operating at a high speed. On the other hand, if your speeds are slightly lower and aren’t running on the highways, the bearing grease should hold up longer. It is a fine line between grease protection and running speeds. The more speed you use, the more strain is put on the bearings.

Heat Plays a Role in Greasing

On any hot day, your engine can exceed the heat barrier the grease sits at offering protection. Grease begins to lose viscosity at hot temperatures, and it can happen at any given time.

Remember, engines get extremely hot and on a warm day, they can go above and beyond what an engine can handle. Protection for the bearings is necessary and will require regreasing at this point. It’s the same with a Dexter axle hub cap; when there is a problem, it’s time to repair the problem. Click here to read more about How to Lubricate Dexter EZ Lube Axles.

Act When You Have a Missing Bearing Cap

There are times when greasing the bearings is more necessary than others. For instance, if you have a missing bearing cap, you need to act fast. The bearing will become grimy, and water is likely to get in too (if it rains). These conditions can play havoc with the bearings and cause major problems, to say the least. So, you need to replace the missing bearing cap and regrease it also.

Old Grease Should Be Changed

A lot of people wait until they reach ten thousand miles before they change the grease. This, however, isn’t always smart. It can take several years to clock up those miles, especially if you don’t use the trailer often. For example, you use the trailer in June and July and let it sit at home for another eight months. Instead of waiting until you’ve hit ten thousand miles, you should change and regrease the bearings before taking the trailer back out.

Maintain Your Bearings to Keep Them in Good Running Order

In conclusion, proper maintenance of enclosed trailer accessories, such as the Dexter axle hub cap and trailer bearings, is essential to ensure smooth operation and prevent costly repairs. While a general rule of thumb suggests greasing trailer bearings every ten thousand miles, factors like usage frequency, speed, and temperature can influence the frequency of greasing.

Regular inspection of bearings, timely replacement of missing bearing caps, and changing old grease before reaching the ten thousand-mile mark are crucial steps to maintain optimal performance and longevity. By caring for trailer bearings as diligently as a Dexter axle hub cap, you can avoid unexpected breakdowns and extend the lifespan of your trailer accessories, ensuring safe and efficient trailer operation.…